Vistas:99 Autor:Editor del sitio Hora de publicación: 2022-09-30 Origen:Sitio
Stone cutting is the most basic step in stone engineering. The cutting process requires both speed and accuracy. The precision of stone cutting determines the quality of stone processing and the level of yield. Slab Cutting Machine can ensure high cutting accuracy and improve cutting efficiency.
What are the structural features of the Slab Cutting Machine?
What should I prepare before cutting with the Slab Cutting Machine?
What are the precautions for the operation of the Slab Cutting Machine?
Automatic layout optimization function
On the side of the Slab Cutting Machine, considering the particularity of the processing cost and the type of album work, people with high education are generally not arranged to do it. This requires the operation of the Slab Cutting Machine to be simple, easy to understand, and not too complicated, otherwise It will lead to an embarrassing situation where one can afford to buy a machine and cannot keep a machine.
Do not have too many I/O signals and sensors on the Slab Cutting Machine, and keep as few unnecessary switches and indicator lights as possible, because once a certain part of the machine fails, it will affect the use of the cutting machine, and the probability of failure is low if there are fewer parts. , the wiring is also less, it is easy to find faults and replace parts, it is best to debug the state of each I/O signal on the screen. Maintenance costs are an important factor that must be considered when purchasing a machine.
Preparation before cutting with Slab Cutting Machine
(1) The performance of the equipment must be carefully checked before use to ensure the integrity of each component.
(2) The power switch, the tightness of the saw blade, the saw blade guard or the safety baffle should be checked in detail. The operating table must be stable, and there should be sufficient lighting when working at night.
(3) Before use, first turn on the main switch, make a few laps with no load, and allow it to start after confirming that it is safe and correct.
(4) Before operation, it is necessary to check whether the power supply is consistent with the conventional rated voltage of 220VA on the power tool, so as to avoid wrongly connecting to the 380VA power supply.
(1) Be sure to pay full attention to the work of the Slab Cutting Machine, not only to keep a clear head, but also to operate the power tools rationally. It is strictly forbidden to operate the cutting machine after exhaustion, drinking or taking stimulants or drugs.
(2) The power line must be safe and reliable. It is strictly forbidden to pull it without permission. Be careful not to cut off the power line. The performance of the equipment must be carefully checked before use to ensure that all parts are in good condition.
(3) Wear suitable work clothes, do not wear loose work clothes, do not wear jewelry or have long hair, and are strictly prohibited from wearing gloves and unbuttoned cuffs.
Dialead Stone Machinery has various Slab Cutting Machines that can provide the increasing of products, and make them more effective, reliable, and consistent.